about_us-s.png

Why choose Hi-Lo?

HI-LO has been devoted to providing device programming solutions. Established in 1983, after years of hard work and by providing quality products and global services, HI-LO has successfully distributed our products and secured a high market share worldwide. Besides, HI-LO has established overseas offices and programming centers to provide services to satisfy the prompt and high volume of demands from local customers.

Take a quick tour

ALL-300G

High Performance Universal Gang Programmer

  • New generation high performance core and USB3.0 transferring interface significantly increase the programming speed
  • Support up to 16 sockets
  • Support wide range of IC types and packages
  • Full IC pin contact check prevents bad contact in socket or IC damage from reversed placement
  • 8 sets of independent pin drivers provides high speed,high quality and low-noise parallel programming
  • Fast software support by customer’s request

Read more...

Pan Asia Programming Services

Besides specializing in design, manufacturing and marketing of device programmers, HI-LO SYSTEMS established its Programming Center in 2001 to extend its expertise into the field of IC programming services to satisfy the high demands coming from IT and the hand-held device market.

With powerful support from the HI-LO engineering team and over 200 sets of automated programming systems, the HI-LO Programming Center is able to offer comprehensive and also competitive solutions for device programming, ink / laser marking, taping & reeling, 3D optical lead inspection, baking and dry packing, etc., including special requests of customized device programming and packing.

This Center has been ISO 9001 and ISO 14001 certified. Assisted by ERP real-time management control system, all programming processes and operations are under the strictest control. Optimum programming quality, yield and efficiency are sustained at the highest levels. The Programming Center is capable of offering programming services for over 600K units daily. Since we developed the necessary technology ourselves and work with key IC manufacturers at very early stages, HI-LO has already become the most important programming service provider in the market.

Read more...

量產型燒錄器

  • 新一代高速核心,搭配USB3.0傳輸介面,燒錄速度大幅提升
  • ALL-300G針對eMMC, NAND等大容量IC的燒錄速度比ALL-200G快3倍
  • 最多可支援16個燒錄座
  • 支援各種類IC的萬用型燒錄器

Universal Device Programmer

 A new generation compact size high performance device programmer

Introduction

ALL-200 Universal Device Programmer is designed to provide high quality yet compact size programming platform for IC programming at development / engineering stage.

 

ALL-200 extremely high freq. core circuit design significantly cut down programming time of high density memory products.

 

ALL-200 has 56 sets of Precise Universal Pin Driver to provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market.

 

ALL-200 works with dedicated Socket Board (HD-xxx-xxx) per IC package type. This eliminates the requirement of additional socket adaptor / converter which might impact programming yield due to poor contact and/or signal noise.

 

The supporting software is updated weekly on HI-LO web site for checking / retrieving through Internet. Programming of new products will not be neglected after purchasing.

Gang Device Programmer

A multi-site high performance IC device programmer

 

Introduction

ALL-200G Gang Device Programmer is designed to provide high quality programming platform for new released IC products on the market especially for high density FLASH units. ALL-200G works with multiple Socket Boards to perform multi-site programming for limited / mass production. Through USB port, 4/8 sets of ALL-200G can be connected to one PC for either synchronous or asynchronous multi-site programming to maximize production capacity.

 

ALL-200G extremely high freq. core circuit design significantly cut down programming time of high density memory products.

ALL-200G Device Programmer has 56 x 8 sets of Precise Universal Pin Driver to provide high speed, low noise, accurate and reliable programming signals for various IC products including high speed low power devices recently released to market. Each site owns individual Pin Driver so sites are totally independent without interfering each other during multi-site programming.

 

ALL-200G can be setup for multi-site operation when production required. Up to 8 sites x 8 sets = 64 sites can be programmed simultaneously to maximize production. For more to go, the ALL-200G based Automated Programming System, AT3-300 Series, can serve the requirement.

 

The supporting software is updated weekly on HI-LO web site for checking / retrieving through Internet easily. Programming of new products will not be neglected after purchasing.

IC Support Search

Hi-Lo System


New Support IC List

Hi-Lo System


2017/07/06 ATMEL


2017/07/06 ATMEL


2017/07/06 ATMEL


2017/07/06 TI


2017/07/06 MICROCHIP


Service Change

Dear Customers

To best-support our customers, we have moved our software download service on this web to a place where registered customer can only reach.  From now on, customers need to register first in order to download up-to-date software for our products.

Please visit our "Home" page and register.  We are sorry for any inconvenience that may cause.  If you need any further assistance, please contact us for further help at sales@ms1.hilosystems.com.tw. Thank you!!

Strongest NAND & eMMC supports ever...

Superfast ALL-300G is designed to support high density IC devices like NAND, eMMC.

Pan Asia Programming Service with ISO-14001, ISO-9001
, and Automotive TS16949 certified.


3D Lead scan, Coplanarity, 2D measurement,
PVI defect, Scratches, Cracks etc. and Laser marking.


High density NAND,eMMC etc., Customized programming
prodution.

Go to top