Introduction
HL-740A equipment is a professional laser marker for ICs on / in tray. Automated operation with simple setting, user can adjust power and scan speed to optimize the marking result. System provides High-accuracy mode and High-speed mode.
In High-accuracy mode, system is with 0.1mm high-accuracy CCD alignment; In High-speed mode, system takes 40 seconds for one tray marking. HL-740A creates high-quality and high-efficiency IC mass marking
Key Features
- Automated operation
Auto tray move in, move out and replacement. Without IC picking & placing and touching can reduce the risk of damaging IC. - Powerful operation software
Set parameters are saved for same marking operation. Graphical user interface makes it easy to access. - High-accuracy marking
With 0.1mm high-accuracy CCD alignment marking, system creates high quality marking on a wide range of materials by different kinds of power and scan speed. - High-speed marking
After CCD aligning per tray at a time, system marks whole IC on tray. Besides, system takes about 40 seconds per tray to finish character marking.
Specification
- Motion
- Tray X-Y driver axis servo drive
- CCD single-axis servo drive
- Marking style
- XYZ 3-Axis simultaneous scanning method, YVO4(1064nm)
- Minimum character size (height / width)
- 0.1mm x 0.1mm
- Optical module
- 27um/pixel, provide marking position alignment
- Applicable products
- TSSOP, TSOP, SOP, TQFP, QFP, BGA
- Throughput (for SOP8)
- High-accuracy mode : 4600 ~ 4800 UPH
- High-speed mode : 14000 ~ 14200 UPH
- I/O devices
- Built-in Auto Tray I/O
- Stack up to 20~25 JEDEC / EIAJ tray
- Controller
- PC-based control with Windows 7
- Display / Data Entry
- LCD monitor, keyboard, mouse
- Dimension
- W x D x H : 1390mm x 1000mm x 1930mm
- (H: 1930mm with tower light installed)