AT3-310A2N

Auto Programming System

Up to 2500 UPH with 4 pick & place nozzles¹
Equipped with 4 units of ALL-200G or ALL-300G programmers, supports up to 64 sockets
Flexible I/O options. Supports tray / tape / tube
Accuracy – oriented design and precise vision positioning system capable of handling 1.5mm x 1.5mm devices such as WLCSP

High throughput, high performance

Equipped with 4 nozzles, up to 2500 UPH
Well balanced hardware design with optimized system parameters ensure the handling accuracy under high speed movement

Equipped with 4 units of ALL-200G or ALL-300G programmers
Up to 64 devices programming simultaneously
Support wide range of devices including MCU/MPU, EEPROM, eMMC, eMCP, SPI memory, NOR/NAND flash, FPGA, etc…

Carried camera (0.3M pixels) for socket positioning
Fixed camera (1.3M pixels) for IC pick & place positioning
Minimize the jam rate during handling as well as the possibility of lead bent. Capable of handling as small as 1.5mm x 1.5mm devices such as WLCSP
New generation image processing core realizes fully auto vision positioning process

All setup data such as IC type, socket type and position, are saved accordingly to achieve zero changeover time
User friendly operating interface minimize the possibility of misoperation
Provides detailed information of machine status, production status, warning, etc…
Detailed production reports and log files are saved for traceability


Laser marker	Label feeder	Pad printing system

Throughput		Max. 2500 UPH
Pick & Place System	Transmission	Precision ball screws and linear guides
	Drive system	Servo motors
	Resolution	X/Y/Z:0.0025 mm；θ:0.15^o
Vision System	Carried camera	0.3M pixels, accuracy: ± 0.02 mm
	Fixed camera	1.3M pixels, accuracy: ± 0.01 mm
	Processing speed	0.03 s / device
Programmer		All-200G x 4 units, up to 32 sockets
Programmer		All-300G x 4 units, up to 64 sockets
I/O Devices	Tray	AutoTray (up to 25 JEDEC trays)
		Semi-AutoTray
		Manual tray
	Tape	Electric tape-in, 8~32mm (2 tape-in can be installed)
	Tape	Tape-out, 8~44mm, heat-sealing or adhesive cover tape, Ink marking (dot, alphanumeric character)
	Tube	Auto Tube-In, up to 25 tubes
		Tube-In, (4 / 6 / 8 tubes)
		Tube-Out (4 / 6 / 8 tubes)
	Other	NG box
	Other	Bowl feeder
Control system	Operating system	Windows 7
	Control interface	Monitor / Keyboard / Mouse
	Comm. interface	Ethernet / USB 3.0
Power	AC power	220 ~ 240V single phase / 50 - 60 Hz / 2.5 kW (max capacity)
Air pressure		0.6 MPa, 45 L/min
Weight		840 kg (Main unit)

	W	D	H
Main unit	1500 mm	840 mm	1510 mm(1678mm with tower light)
+ AutoTray (front)	1500 mm	1475 mm	1678 mm
+ AutoTray (back)	1500 mm	1432 mm	1678 mm
+ TapeIn / Tapeout (front)	1500 mm	1845 mm	1678 mm
+ TubeIn / TubeOut (front)	1500 mm	1650 mm	1678 mm
+ TapeIn / Tapeout (front) + AutoTray (back)	1500 mm	2437 mm	1678 mm

¹Depends on IC programming time