Introduction
HL-730A IC Taping Optical Inspection System is an auto visual inspection equipment for IC taping processing. System offers excellent performance through graphical user interface, providing fast and stable visual inspection of pocketed IC orientation, dot, marking, PVI, bent lead, void, stacking (optional) , flip-over as well as tape sealing. HL-730A is the best vehicle to ensure quality of IC taping operation.
Key Features
- Fast and stable inspection capability
- Using our superior image processing library, HL-730A system optimizes each inspection function and significantly shorten processing time to provide fast and stable inspection capability.
- High production throughput
- UPH (Unit Per Hour) reaches up to 40K. IC tape with pocket pitch less than 8mm can have 40000 units / hour inspection throughput.
- Powerful operation software
- Easy-to-use graphical user interface Parameter setup can be saved for next time operation without re-learning of sample image.
- Inspection results is available for engineering analysis, yield improvement and quality traceability.
- Intelligent operation
- Flexible inspection operation. Two operation modes are available:
- 1.Fail-Mark Mode (optional):Record the abnormality index and re-inspect while
- tape reversing. If it fails again, mark it on tape.
- 2.Fail-Pause Mode:(Normal Mode). Record the abnormality index and reinspect
- while tape reversing. If it fails again, then pause on fail for disposition.
- Wide range of tape width
- Applicable for tape with tape width from 8mm to 44mm
- (Optical Module needs to be replaced for tape width > 25mm)
Specification
- Visual system
- Image resolution:1296 x 966 pixels
- Throughput
- 40000UPH (IC tape with pocket pitch < 8mm)
- IC inspection items
- Pocket IC Orientation
- Pocket IC Dot
- Missing Dot / Dot Size / Broken Dot
- Pocket IC Void
- Pocket IC Stacking (optional)
- Tape Sealing
- Miss Alignment / Broken Sealing
- Pocket IC Bent Lead
- Pocket IC Marking
- Pocket IC PVI
- I/O
- Reel Input / Reel Output
- Control
- PC-based control with Windows XP
- Power & Air
- Power:AC 200 ~ 245V / 50-60Hz Single Phase
- Air pressure:0.6MPa( ~ 6.0kg/cm² )
- Dimension
- W x D x H︰1,117mm x 390mm x 1,575mm